 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FBR5000 - FBR5010 PRV : 50 - 1000 Volts Io : 50 Amperes FEATURES : * * * * * * High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency FAST RECOVERY BRIDGE RECTIFIERS BR50 0.728(18.50) 0.688(17.40) 0.570(14.50) 0.530(13.40) 0.685(16.70) 1.130(28.70) 0.618(15.70) 1.120(28.40) MECHANICAL DATA : * Case : Molded plastic with heatsink integrally mounted in the bridge encapsulation * Epoxy : UL94V-O rate flame retardant * Terminals : plated .25" (6.35 mm). Faston * Polarity : Polarity symbols marked on case * Mounting position : Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 17.1 grams Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 0.658(16.70) 0.618(15.70) 0.032(0.81) 0.028(0.71) 0.210(5.30) 0.200(5.10) 0.252(6.40) 0.248(6.30) 0.100(2.50) 0.090(2.30) 0.905(23.0) 0.826(21.0) 0.310(7.87) 0.280(7.11) Metal Heatsink Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATING Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current Tc = 55 C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Current Squared Time at t < 8.3 ms. Maximum Forward Voltage drop per Diode at I F = 25 Amps. Maximum DC Reverse Current Ta = 25 C Ta = 100 C at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 1) Operating Junction Temperature Range Storage Temperature Range SYMBOL VRRM VRMS FBR 5000 50 35 50 FBR 5001 100 70 100 FBR 5002 200 140 200 FBR 5004 400 280 400 50 400 664 1.3 10 1.0 FBR 5006 600 420 600 FBR 5008 800 560 800 FBR 5010 1000 700 1000 UNIT Volts Volts Volts Amps. Amps. AS Volts 2 VDC IF(AV) IFSM It VF IR IR(H) Trr RJC TJ TSTG 2 A mA 300 500 ns 200 1 - 50 to + 150 - 50 to + 150 Typical Thermal Resistance per diode (Note 2) C/W C C Notes : 1 ) Measured with IF = 0.5 Amp., IR = 1 Amp., Irr = 0.25 Amp. 2 ) Thermal resistance from Junction to Case with units mounted on a 9"x5"x4.6" (22.9x12.7x11.7 cm) Al-Finned Heatsink. UPDATE : NOVEMBER 1, 1998 RATING AND CHARACTERISTIC CURVES ( FBR5000 - FBR5010 ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 10 + 0.5 A D.U.T. 0 - 0.25 Trr + 50 Vdc (approx) 1 OSCILLOSCOPE ( NOTE 1 ) PULSE GENERATOR ( NOTE 2 ) - 1.0 A SET TIME BASE FOR 50/200 ns/cm NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. 1 cm FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 50 500 FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Tc = 55 C 400 AVERAGE FORWARD OUTPUT CURRENT, AMPERES 40 30 PEAK FORWARD SURGE CURRENT, AMPERES 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 175 300 20 200 10 100 0 0 1 2 4 6 10 20 40 60 100 CASE TEMPERATURE, ( C) NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS PER DIODE 100 FIG.5 - TYPICAL REVERSE CHARACTERISTICS PER DIODE REVERSE CURRENT, MICROAMPERES 10 TJ = 100 C FORWARD CURRENT, AMPERES 10 1.0 1.0 0.1 TJ = 25 C Pulse Width = 300 s 2% Duty Cycle 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE, VOLTS |
Price & Availability of FBR5000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |